Cygnus 850 V.35 Посібник зі швидкого встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Модем Cygnus 850 V.35. Cygnus 850 V.35 6 сторінок. 2 mbps modem

If your speed is multiples of 64 kbps ( eg.: 128 kbps i.e. 2 slots ), then select to configure individual

timeslots ( 2.2.3 of flowchart diagram ) and you will get a prompt to enter the timeslot. Start with "1",

select it as DTE for V.35 modem & as E1 for E1 modem and continue upto the number of timeslots you

required as per the speed ( for 128 kbps only 1 & 2 slots should be DTE/E1 and remaining slots should be

IDLE ). For 256 kbps speed 4 slots and for 512 kbps 8 slots should be DTE/E1 keeping all other slots as

IDLE.

All the changes done in the configuration will take effect only after the same has been saved and the unit

is restarted.

To save the parameters, navigate through the menus to store parameters in NVRAM ( 2.1.7 of

flowchart diagram ) and type " Y " to save.

Then you can restart the unit manually or by selecting to reset the unit ( 2.1.8 of flowchart diagram ) from

the system parameters menu and typing " Y ".

To see the configuration, select to view unit status and check Framing, it should be Framed for V.35

modem and Framed:PCM31 for E1 modem.

Both the units ( V.35 & E1 ) should have same configuration i.e. framed.

After following the above steps for configuring, the modem is ready to be connected on line.

Page 2 of 6