Cygnus 850 V.35 Посібник зі швидкого встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Модем Cygnus 850 V.35. Cygnus 850 V.35 6 сторінок. 2 mbps modem

Menus flow chart of CYGNUS 850 V.35 Modem
1.To view unit status
To view unit running
parameters
1.To configure system
2.To configure TDM
parameters
timeslots
1.To configure System
1.To configure all timeslots
Clocking mode
as IDLE
1. Line Slave 2. DTE Slave
2.To configure all timeslots
3. DTE XTX 4. Internal
as DTE
2.To configure Framing
3.To configure individual
Type
timeslots
1.To set to unframed 2Mbps
2.To set to framed nX64kbps
3.To configure Test Pattern
Type
1.To set to 2E11-1
2.To set to 2E15-1
4.To configure Rate vs Range
trade off
1.To set this to NO
2.To set this to YES
5.To specify unit ID
To configure unit ID
6.To specify console port
password
To configure Console
password
7.To store parameters in
NVRAM
To save the parameters
8.To reset the unit
To reset the unit
9.To configure factory
default parameters
To load the factory default
parameters
Root
2.To configure the unit
3.For control function
For diagnostics tests &
to view line Statistics
3.To configure DSL
4.To configure DTE
port parameters
port parameters
1.To configure RX Clock
1.To configure DSL Type
1.DSL Type as LT
2.DSL Type as NT
2.To configure TX Clock
2.To configure DSL Frame
Type
1.Frame Type as Sync
2.Frame Type as Plesio
3.To configure Data
Page 4 of 6
5.To configure Console
Port parameters
1.To configure Console
inversion
Port speed
1.No inversion of RX Clock
1.4800 bps
2.Invert Rx Clock
3.19200 bps 4.38400 bps
5.57600 bps
inversion
2.To configure Console
Port parity
1.No inversion of TX Clock
2.Invert TX Clock
1.Even 2.Odd 3.None
3.To configure Console
inversion
Port Databits
1.No data inversion
2.Data invert
1.To set this to 7 bit
2.To set this to 8 bit
4.To configure Console
Port Stopbits
1.To set this to 1 bit
2.To set this to 2 bit
Factory default parameters
System Clock : Line Slave
DSL Type
: NT
Framing
: Unframed
2.9600 bps