Dogtrace DOG GPS X20 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Dogtrace DOG GPS X20. Dogtrace DOG GPS X20 19 сторінок.
Друкувати сторінку
3. By arrows
/
(collar). Free position (where there is no paired transmitter) indicates lettering
on the LCD.
4. Hold the button CODE again for 2 seconds.
5. Move the transmitter close to the receiver.
6. When paired the LCD shows lettering
to which you´ve paired the transmitter).
7. If you need to pair another transmitter, follow the procedure from the step 3.
8. To finish the regime of pairing – coding press the button
Note: To delete one of the paired transmitters (collars) from the receiver memory,
perform pairing without switched on transmitter. After about 10 seconds, there will
be displayed lettering
7.5 Digital compass calibration
To display accurate direction to the transmitter collar, it is important to perform the
calibration properly. If the device does not show correct direction even with maximum
precision GPS (3 lines on both signal indicators GPS on the display), it has not been
probably calibrated for long time or has been calibrated incorrectly.
WARNING: Always perform calibration outdoors, away from objects that emit mag-
netic fields - buildings, cars, overhead and underground power lines.
Starting calibration
If you know the direction towards to the magnetic north, you can go directly to second
step.
1. Press simultaneously two bottom buttons
calibration. Then repeatedly rotate the device around each of the three axes (picture
no. 1). To finish calibration press the back button. For more accurate calibration,
continue to step 2.
2. Using the compass on the display, look up the north and turn the receiver so that the
antenna faces the north (picture no. 2). Press simultaneously two bottom buttons
and
for 2 seconds - to start the calibration.
picture no. 1
12
choose the position, to which you want to pair the transmitter
at choosen position.
až
(according to the choosen position,
.
and
for 2 seconds - to start the
picture no. 2