ASHAPOWER ROVER-5000LV-48V Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Інвертор ASHAPOWER ROVER-5000LV-48V. ASHAPOWER ROVER-5000LV-48V 14 сторінок. Solar mppt pcu

Друкувати сторінку

ASHAPOWER SOLAR -PCU- ROVER SERIES

SOL-ABSN-V

SOLAR CHG.ABSORPTION VOLT

SOL-BULK-V

SOLAR CHG. BULK VOLT

SOL-MAX-AMP

LIMIT TOTAL OUTPUT AMP

BAT-MAX-AMP

LIMIT CHG. AMP TO BATTERY

CAL-PSWD-0

CAL-PSWD-1

CAL-PSWD-2

CAL-PSWD-3

FACT-RESET

RESTORE FACTORY SETTINGS

TYPE OF

SETTINGS

Limit the absorption charging voltage limit for the connected

batteries.Default value given is for C10 grade lead acid batteries.

CUSTOMER

( whenever the battery voltage goes below the float voltage the

SETTINGS

the device enters again to bulk and absorption charging modes

and ret urns to float level and maintains acid gravity)

Limit the maximum bulk charging voltage recommended for the

CUSTOMER

batteries.This value varies in di erent types of batteries.Default value

SETTINGS

given is for C10 grade solar Lead acid batteries.For SMF and Gel

batteries this value is between 13.5V to 14.5V (Refer battery user manual

CUSTOMER

Limit the total output current from the charge controller to the battery

SETTINGS

and connected load

Limit the charging current to the battery if needed. (maximum charging

current is recommended as 20% of the Ah of a single 12V lead acid battery.

CUSTOMER

Eg: for a 150Ah battery,30 ampere is the maximum charging current

SETTINGS

recommended. Refer battery user manual before changing the value

ADVANCED SYSTEM SETTINGS

TECHNICIAN

SETTINGS

CUSTOMER

To reset all settings to factory settings change the default

SETTINGS

value from "0" to "1"

MAIN FUNCTION SETTINGS

DESCRIPTION

WITH PASSWORD

Vers.5.1

RANGE

MIN

DEFAULT

MAX

11 V

14V

16V

13V

14.6V

16.5V

30A

50A

40A

50A