Cypress CY8CKIT-002 Посібник з експлуатації комплекту - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації комплекту для Материнська плата Cypress CY8CKIT-002. Cypress CY8CKIT-002 16 сторінок. Psoc miniprog3 program and debug kit guide

Друкувати сторінку

Introduction

The PSoC

PSoC 4, PSoC 5LP, and PSoC 6 architectures, a debug tool for PSoC 3, PSoC 4, PSoC 5LP, and

PSoC 6 architectures, and an USB-I

communicating with PSoC devices.

Designed as a low-cost aid for developers to use in building their own systems around Cypress 8-bit

and 32-bit PSoC devices, the MiniProg3 is included with the

as a standalone kit, CY8CKIT-002. These kits are available through the

through our distributors.

Figure 1-1. MiniProg3

1.1

CY8CKIT-002 Contents

The CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit includes:

MiniProg3 programmer/debugger

■

10-pin ribbon cable

■

USB Standard-A to Mini-B cable

■

Quick Start Guide

■

1.2

Programming

The MiniProg3 programmer/debugger provides the flexibility to work with different programming and

debugging interfaces, such as JTAG, SWD, ISSP, and I

PSoC devices. When programming, MiniProg3 enables communication with target devices using I/O

voltage levels from 1.5 V to 5.5 V. In addition, MiniProg3 can supply power to a simple target board

at one of four voltage levels: 1.8 V, 2.5 V, 3.3 V, or 5 V.

CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit Guide, Doc. # 001-59350 Rev. *I

MiniProg3 Program and Debug Kit is an all-in-one programmer for PSoC 1, PSoC 3,

C Bridge for debugging I

CY8CKIT-001

C. MiniProg3 supports all 8-bit and 32-bit

C serial connections and

development kit and sold

Cypress Online Store