Cypress Semiconductor CYALKIT-E03 Посібник з експлуатації комплекту - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації комплекту для Аксесуари Cypress Semiconductor CYALKIT-E03. Cypress Semiconductor CYALKIT-E03 19 сторінок. Solar-powered bluetooth low energy sensor beacon 5 pack
Також для Cypress Semiconductor CYALKIT-E03: Посібник із швидкого старту (2 сторінок)
Друкувати сторінку2.2.1.2 Installing the iOS App
Open App Store and search for "Cypress BLE-Beacon."
1.
Select the Cypress BLE-Beacon (BLE-Beacon) app, and proceed to install the app on your iOS device.
2.
Place the Solar BLE Sensor under an office light. Refer to step 3 of
3.
Launch the BLE-Beacon app. A splash screen is displayed for a few seconds before the app displays the Device List
4.
screen. If Bluetooth is turned OFF in the iOS device, iOS will display a message box to turn ON Bluetooth with the
Settings and OK buttons. Click the Settings button to turn ON Bluetooth on the Settings screen. Clicking the OK
button will display the message "Please turn Bluetooth ON," which requires the standard iOS procedure to turn ON
Bluetooth.
The BLE-Beacon app performs device discovery by default when the app is opened. Select the mode as Graph to
5.
display the sensor data. You can recognize the five data (#2 to #6) on the graph screen.
Note: If you are evaluating this demo near the same ID of another Kit, the Graph will display incorrect data. In this
case, disable transmitting BLE data of all other kits and then repeat this step.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
2.1.1 Establishing BLE
Connection.
Enclosure
12