Cypress Semiconductor CYALKIT-E03 Посібник з експлуатації комплекту - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації комплекту для Аксесуари Cypress Semiconductor CYALKIT-E03. Cypress Semiconductor CYALKIT-E03 19 сторінок. Solar-powered bluetooth low energy sensor beacon 5 pack
Також для Cypress Semiconductor CYALKIT-E03: Посібник із швидкого старту (2 сторінок)
Друкувати сторінкуPlace the five Solar BLE Sensors under an office light. After placing the Solar BLE Sensors under a suitable light (refer
3.
to
Table 2-1. Light Level Versus Time
Typical Light Level
~1 lx
100 lx~200 lx
200 lx~400 lx
400 lx~500 lx
1000 lx ~
1
The time interval of the sensor will be three seconds in all light levels when the supercapacitor on the Solar BLE Sensor is fully charged
2.2 WSN Operation with a Mobile Device
In this section, you will confirm that the Solar BLE Sensors are operating as a WSN by using the apps on your mobile device
to detect temperature and humidity changes.
2.2.1 Mobile Apps Installation
The Cypress BLE-Beacon app is available on Google Play and in the Apple Store for free. To install the app, follow these
instructions.
2.2.1.1 Installing the Android App
Open Google Play and search for "Cypress BLE-Beacon".
1.
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Interval), it will automatically power up and begin transmitting.
Table 2-1. Light Level Versus Time Interval
Environment
Moonlight
Under street lighting
At museum
Office lighting
Shopping mall, rainy day
Time Interval of Sensor
Does not work
50 s ~
30 s ~ 50 s
15 s ~ 30 s
3 s ~ 15 s
Enclosure
1
.
10