Cyrus 6vs Інструкція користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція користувача для Підсилювач Cyrus 6vs. Cyrus 6vs 7 сторінок.
Друкувати сторінкуCyrus 6vs & Cyrus 8vs
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art
design technology and outstanding quality of manufacture has won countless
awards around the world. We are confident that you will derive great pleasure
from owning a product from one of the most recognised and respected
manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your Cyrus 6vs/8vs safely and
correctly.
Preparations for Installation
Before installing the Cyrus 6vs/8vs check that the following items are included
in the accessory box.
•
Warranty Card (with instruction manual)
•
Power Cable
•
Remote Handset
•
4 Loudspeaker Plugs (certain markets only)
After removing these items, please retain the packaging.
Install the Cyrus 6vs/8vs in a well ventilated location away from sources of
high temperature, dust or humidity. Never stand the Cyrus 6vs/8vs under
another unit or on any surface likely to obstruct its cooling or ventilation.
INSTALLATION
(Refer to Fig 1):
Key to the rear panel drawing:
1.
Right Speaker Output
2.
MC-BUS System Connection
3.
Pre-Amplifier Output
4.
Tape Recorder Output
5.
TAPE Input
6.
MP3 Input
7.
LINK Input
8.
AUX/PH Input
Connecting to the AC Mains Supply
Connect the socket on the AC Power cable to the Power inlet 1% on the rear panel
of the Cyrus 6vs/8vs. Now connect the cable to a suitable AC power point.
The mains power switch 1& on the rear panel of the Cyrus 6vs/8vs should be
left on for normal operation, except when left unattended for a long period
when it should be switched off or disconnected from the AC supply.
Connecting Signal Inputs
Connect a phono cable between each component and the sockets as marked
on the rear panel. Ensure left and right channels are correctly connected. The
Cyrus 6vs/8vs has inputs for CD Player –CD 1!, a tuner - TU 1), a Home
Theatre decoder - AV i and
three auxiliary inputs – AUX/PH h, LINK g and
MP3 f
which can be used to connect a wide variety of products. Check the
specification of these products before connecting to your Cyrus 6vs/8vs.
Connecting a Turntable
The Cyrus 6vs/8vs is a line level amplifier. To play a turntable through your
unit an external phono pre-amplifier is required.
Connecting Tape/Disc recorders
To connect the tape recorder you will need two phono cables. Connect one
cable from the
Output or Playback sockets of the tape deck to the TAPE Input
e of the Cyrus 6vs/8vs
and a second cable from the Input or Record sockets
of the tape deck to the Tape Record Output - TP OUT d sockets of the Cyrus
6vs/8vs.
2
9.
AV Input
10. Tuner Input
11. CD Input
12. Left Speaker Output
13. PSX-R Connection
14. Headphone socket
15. Power Inlet
16. Mains Fuse Holder
17. Power Switch
Connecting Headphones
The headphones socket t is a standard 6.35mm (¼") stereo jack socket for
connection to a pair of headphones. Headphones may be permanently
connected to the amplifier and selected when required with the front panel
switch.
Connecting Loudspeakers
Fit plugs to the loudspeaker cables making sure to line up + and - at each
end. Most cables have polarity indicators and may also be marked for
directionality. The + and - terminals of the Cyrus 6vs/8vs must be connected
to the corresponding + and - terminals of the loudspeakers.
Ensure that the connections are secure, then connect the left and right
loudspeakers to the rear panel sockets a and 1@ of the Cyrus 6vs/8vs.
NOTE: The dual output sockets of the Cyrus 6vs/8vs are provided for
convenient connection of bi-wiring speaker cables.
MC-BUS System
(Refer to figs 1 & 7)
Connecting the MC-BUS sockets b of the Cyrus 6vs/8vs in an MC-BUS
system provides unified system control. An MC-BUS loop is established by
connecting single phono cables from the MC-BUS output of one unit to the
MC-BUS input of another in a daisy-chain. Complete the loop by returning the
MC-BUS output of the final component to the MC-BUS input of the first.
With MC-BUS established you can control the power function of the entire
system from the Cyrus 6vs/8vs, from the front panel or remote control.
Selecting 'CD' from the front panel will switch on the Cyrus 6vs/8vs, the Cyrus
power amplifier
and a Cyrus CD player. When the Cyrus 6vs/8vs is set to
Standby, the entire system will also switch off.
When a Cyrus Surround Processor is in the MC-BUS loop, setting of the
volume calibration level will take place automatically when Cyrus 6vs/8vs's
AV input is selected. Refer to the handbook for the Surround Processor for
further details.
External Regulated Power Supply - PSX-R
The PSX-R is a unique DC power supply which will upgrade the sonic
performance of your Cyrus 8vs. When a Cyrus 8vs / PSX-R combination is
installed, analogue and signal related sections of the Cyrus 6vs/8vs are
powered from this clean, stable power source while other requirements are
supplied internally. This ensures complete isolation of control circuits and
sensitive analogue sections reducing AC mains-borne noise and power
supply ripple.
To connect the PSX-R to the Cyrus 8vs plug the connector on the umbilical
cord of the PSX-R into the Multi-Pole socket on the rear of the Cyrus 8vs (1#
Fig.1) You will need a mains supply for both units.
OPERATION
(Refer to fig 2)
Key to the front panel drawing:
1.
Mute Switch
2.
Standby Switch
3.
Standby Light
4.
Headphone Switch
5.
Remote Eye
6.
Level Control
7.
TAPE Tape Monitor
Power
When power is applied, the STANDBY key b is used for power control. The
Standby light c shows green when the Cyrus 6vs/8vs is operating and glows
red when in standby mode. The Cyrus 6vs/8vs will switch from standby to on,
when any input key h-1# is selected.
When the Cyrus 6vs/8vs is switched on from the rear panel mains switch, it
will perform a self-test and wait in Standby mode.
When the Cyrus 6vs/8vs is switched to Standby, all settings for input selection
and Volume/Balance are retained.
Selecting an Input
The INPUT SELECT keys h-1# switch selected input sources. When an input
key is selected, the red indicator above the key will turn on.
User Instructions
(Cyrus 8vs only)
8.
MP3 Input
9.
LINK Input
10.
AUX/PH Input
11. Video (AV) Input
12. Tuner Input
13. CD Input
GB
GB