BlueParrott S450-XT Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури BlueParrott S450-XT. BlueParrott S450-XT 16 сторінок.

ADVANCED BLUETOOTH

Rejecting a Call

To reject an incoming call when not on another call, press and hold the MFB for 1-2 seconds.

Phone Voice Control (e.g. Siri

Press the MFB once while the S450-XT is in Standby Mode to initiate voice command functions on your

phone. Support for this is phone dependent. See your phone's user guide for more information.

The Parrott Button on the S450-XT is configured at point of manufacture to act as a mute. If you have not

changed the Parrott Button function, a brief press while on a call will mute the microphone. Press again

to unmute.

If the Parrott Button has been reconfigured to do something else, the S450-XT microphone can be muted

while on a call by pressing and holding the Volume Up button for 1-2 seconds. A single tone will sound as

mute is engaged.

To unmute, press and hold the button again for 1-2 seconds.

While muted, a reminder tone will sound every 10 seconds.

Note: When in USB mode, pressing the Parrott Button will mute and unmute the microphone, even if you

have configured it to do something else when it is in Bluetooth mode.

Turning Headset Indicator Lights On/Off

A quick press of the Volume Up and Volume Down buttons together will turn the headset indicator lights off.

Repeat to turn the indicator lights on.

When powering on the headset, the indicator lights will be in the same state as they were when last

powered off.

Resetting the Headset's Paired Devices List

This will reset or clear the headset's internal paired devices list. The S450-XT must be on to perform

this function.

1. Power on the headset. It does not matter if it connects to any devices.

2. Hold the S450-XT near your ear and press and hold the Volume Up and the Volume Down buttons together

for approximately 6-10 seconds until two low tones are heard. The LED will flash red two times, and then

the S450-XT will automatically go into Pairing Mode.

3. If you are not ready to pair the S450-XT with a device, power it off. The pairing memory is now clear

and the S450-XT will need to be paired to any desired devices before it can be used with them.

VXi BlueParrott

S450-XT User Guide

FEATURES AND FUNCTIONS

or Google Now

)

(continued)

PAGE 11