Asko HG1666AD Інструкція з конвертації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з конвертації для Варильна поверхня Asko HG1666AD. Asko HG1666AD 9 сторінок.

Conversion instruction

Introduction

WARNING!

Performing of these instructions by a non-qualified engineer can lead to dangerous

situations.

The supplier is not responsible for the consequences (the arising of a hazardous situation

and/or damage to persons or goods) caused by incorrect performance of these instructions

by engineers who are not employees of the supplier. Consequential damage arising through

inexpert performance of these instructions is not accepted.

This conversion-set consists of original parts. Original parts are tested for suitability and safety

during the type approval of the appliance. Frequently performed batch-approvals guarantee

the quality of original parts.

The supplier recommends, when converting an appliance to another gas type, to have this

performed by an engineer of the service department. Contact the supplier to make an

appointment with a service engineer.

For addresses see the guarantee regulations of the appliance.

With this conversion-set you can convert your gas hob from natural gas (NG) to universal liqified

petroleum gas (ULPG). Before you start conversion, check whether your gas hob is genuinely set

to natural gas.

Tools

A. Socket spanner

B. Screw driver flat

blade

C. Screw driver Torx

D. Screw driver cross

head

Tools

E. Nose pliers

F. Open end spanner

G. Leakage test spray