Ambient Weather WS-26 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Ambient Weather WS-26. Ambient Weather WS-26 8 сторінок. Indoor thermo-hygrometer with daily min/max display
Друкувати сторінку
2. Hour. Press the [+] or [-] key to increase or decrease the hour. Press the SET key to
advance to the next setting.
3. Minute. Press the [+] or [-] key to increase or decrease the minute. Press the SET key to
advance to the next setting.
4. Month-Day/Day-Month format. Press the [+] key to switch between mm-dd and dd-mm
date format. Press the SET key to advance to the next setting.
5. Month. Press the [+] or [-] key to increase or decrease the month. Press the SET key to
advance to the next setting.
6. Day. Press the [+] or [-] key to increase or decrease the day. Press the SET key to advance
to the next setting.
7. Year. Press the [+] or [-] key to increase or decrease the year. Press the SET key to advance
to the next setting.
8. Alarm Hour. Press the [+] or [-] key to increase or decrease the alarm hour. Press the SET
key to advance to the next setting.
9. Alarm Minute. Press the [+] or [-] key to increase or decrease the alarm minute. Press the
SET key to advance to the next setting.
10. Temperature Units of Measure. Press the [+] or [-] key to switch between °F and °C units of
measure. Press the SET key to advance to the next setting.
11. Max/Min Clearing. The Max/Min can be programmed to clear daily (at midnight) or
manually. Press the [+] or [-] key to switch between "Clears Daily" and Clears Manually.
Press the SET key to exit setting.
5.2 Day Month/Year/Alarm Display
Press the SET key (do not hold) to toggle between the Day/Month, Year and Alarm Time.
5.3 Time Alarm
To turn on and off the Time Alarm, press the CLEAR/- button and the alarm icon will appear
when set, and disappear when disabled.
5.4 Reset Max/Min
To reset the Max/Min values, press and hold the CLEAR/- button for 3 seconds.
5.5 Adjustment or Calibration
Note: The calibrated value can only be adjusted on the console.
Note: The measured humidity range is between 10 and 99%. Humidity cannot be accurately
measured outside of this range. Thus, the humidity cannot be calibrated below 10% or above 99%.
The purpose of calibration is to fine tune or correct for any sensor error associated with the devices
margin of error. The measurement can be adjusted from the console to calibrate to a known source.
Calibration is only useful if you have a known calibrated source you can compare it against, and is
optional. This section discusses practices, procedures and sources for sensor calibration to reduce
manufacturing and degradation errors. Do not compare your readings obtained from sources such as
the internet, radio, television or newspapers. They are in a different location and typically update once
per hour.
The purpose of your weather station is to measure conditions of your surroundings, which vary
significantly from location to location.
Version 1.1
©Copyright 2019, Ambient LLC. All Rights Reserved.
Page 4