Ambifuego KALIDO 73 Інструкції з монтажу, експлуатації та обслуговування - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкції з монтажу, експлуатації та обслуговування для Внутрішній камін Ambifuego KALIDO 73. Ambifuego KALIDO 73 15 сторінок. Convector gas fire
Lighting the Appliance
1
Open the louvered door at the base of the appliance under the glass door by pulling on
the top edge at the sides.
2
Push in and turn the control knob anti-clockwise to the PILOT position.
3
Hold the knob in for several seconds to purge any air from the system.
4
With the knob still depressed turn it from the "OFF" position to the "PILOT" position until
the pilot light ignites Continue to depress the control knob for a further 10-15 seconds.
Release the control knob, the pilot should stay alight. If the pilot flame goes out, repeat
the process, holding down the control knob for a slightly longer period.
5
Depress the control knob slightly and turn anti-clockwise to the MAX position. The main
burner should now light.
6
Turn the control knob clockwise to the MIN position. The flames will get lower but the
main burner should remain alight.
7
Depress the control knob slightly and turn clockwise to the PILOT position. The main
burner should go out but the pilot flame should remain alight.
8
Depress the control knob slightly and turn clockwise to the OFF position. The pilot flame
should go out.
IMPORTANT:
After turning OFF, or if the pilot burner or main burner go out for any reason, wait 3
minutes before attempting to relight.
Turning the fire off.
1.
Slightly depress the control knob and turn clockwise to the "PILOT" position. The main
burner will go out but the pilot will remain alight.
FIG. 7
11