ambiq micro Apollo2 Blue Посібник із швидкого старту - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Материнська плата ambiq micro Apollo2 Blue. ambiq micro Apollo2 Blue 12 сторінок. Evb
Також для ambiq micro Apollo2 Blue: Посібник із швидкого старту (16 сторінок)
Друкувати сторінку
Revision 1.0, June 2017
5.
Software Development Tools for the Apollo2 EVB
The standard Segger J-Link debug interface is used on the Apollo2 EVB. Please install the latest Beta Segger J-
Link software, and configure your preferred development IDE (Keil, IAR, or Eclipse) to use J-Link debug interface.
Links to development tools that support Apollo2:
•
SEGGER J-Link Software 6.14 (Beta) or newer
•
KEIL uVision MDK523 or newer:
•
New Keil Pack (Also used by Eclipse) at:
•
IAR Version 7.80.4 or 8.10.1 or newer:
cortex-m-edition/
Regardless of preferred IDE, please install the Segger J-Link software. All three of the above development
environments support J-Link, but you must have the latest J-Link software installed. Most alternate
development environments also are supported by J-Link.
Please refer to the AmbiqSuite Getting Started Guide (AMSDKGS) for more details on setting up development
IDEs to use J-Link.
QS-A2-1p00
https://www.segger.com/downloads/jlink_beta
:
https://www.keil.com/demo/eval/arm.htm
http://www.keil.com/dd2/pack/#/third-party-download-dialog
https://www.iar.com/iar-embedded-workbench/tools-for-arm/arm-
Page 9 of 11
Quick Start Guide for
Apollo2 EVB (Rev 1.0)
©2017 Ambiq Micro, Inc.
All rights reserved.