Flycam DSLR-NANO-QR-BL Montageanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Montageanleitung für Kamera-Zubehör Flycam DSLR-NANO-QR-BL herunter. Flycam DSLR-NANO-QR-BL 10 Seiten. Dslr nano blue handheld camera stabilizer

Seite drucken

•

Align the camera center of balance to the

mid plate and secure the head plate and

camera to the mid plate.

•

The many slots on the head and bottom

plates allow you to adjust the X & Y axis for

perfect balance easily. Once achieved, tight-

en the knobs to secure. Further 'fine tuning'

will probably be required..

Head Plate X adjustment

Head Plate Y adjustment

Adding Weights & Positioning for Proper Balance

Continuing the assembly and balance requirements to make your FLYCAM DSLR Nano fully functional, you

will note that the base platform has a provision to mount the balance weights in their cups via a slot

found on both sides of the post.

The counterweight system's purpose is to match the low end of the stabilizer to the weight of the camera

and accessories at the high/top end with gimbaled handle as the pivot point in between. The heavier the

camera and accessories, the more weight is required to achieve proper balance. Generally, as you add

weight to one side of the central post, an equal amount must be added to the other to maintain horizon-

tal balance. However, suppose you are using an oﬀset configuration such as a flip-out viewfinder or oﬀ-

center accessories. In that case, extra weights might be needed on the opposite side of the post to coun-

teract and maintain proper balance.

The total weight fixed to the base platform should equal the weight of your camera plus the head and ac-

cessories.

Horizontal adjustment on the base platform is

made by loosening the retaining screws, mov-

ing the mounted cups closer to or further away

from the stalk, and then re-tightening. You will

probably need to

adjust and re-adjust the horizontal position to

achieve optimum performance/personal pref-

erence.