al dente DUNAFORM Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Zahnärztliche Ausrüstung al dente DUNAFORM herunter. al dente DUNAFORM 8 Seiten. Pressure thermo-forming unit for foil 120 mm and 125 mm

Seite drucken
al dente DUNAFORM Betriebsanleitung

2.3 Extraneous Hazards

The herein mentioned safety notes as well as the warning notes mentioned in further chapters of this manual have to
be observed in order to reduce health hazards and to avoid dangerous situations.

2.31 Electrical Shock Hazard!

For this reason:
• When isolation is damaged, deactivate the power supply immediately and arrange for repair.
• Do not bridge or deactivate fuses. When changing fuses observe the correct amperage!
• Keep live parts from moisture. Danger of short circuit!
• After finishing thermo-forming works switch off the unit.
• After finishing thermo-forming works pull the power plug out of the socket and thereby cut the unit completely
from electricity.

2.32 Caution! Hot surfaces!

For this reason:
• After 5 successive thermo-forming works the unit has to be cooled down.

3. DELIVERY CONTENTS

1 DUNAFORM
1 Plate reception
1 Insert bowl
1 Lead granules
1 MS-fitting for pressure hose 6 mm Ø inside
1 Mains supply cable

4. INCOMING CONTROL

Please check the unit and accessories immediately after receipt for probable transport damages and defects. Warranty
claims can only be enforced if the vendor or shipper is informed immediately. Then a document of damage has promptly to
be made up.

5. TECHNICAL DATA

Mains supply
Max. power consumption
Fuse of unit
Operating pressure
Pressure in hose
Width / Depth / Height
Weight

6. INSTALLATION

6.1 Initiation of the DUNAFORM

• The unit has to be put onto a stable horizontal basis in dry surrounding.
• When mounting the device keep at least a distance of 30 cm to easily inflammable materials like paper, etc.
• The packaging can be disposed of with domestic waste.
4
Risk of fatal injury from touching live parts! Damaging of the isolation or of single components can be
dangerous to life!
Contact with hot surfaces (radiant heater (9)) can cause burns.
230 V AC 50 HZ ± 10 %
850 W
T 4 A
max. 6 bar
max. 6 bar
350x300x190 mm
8,5 kg
order no.
581-003-008
order no.
331-000-507
order no.
581-004-005
order no.
581-004-015
order no.
220-100-030
order no.
214-120-006