AMSEC ESLAudit Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Schlösser AMSEC ESLAudit herunter. AMSEC ESLAudit 15 Seiten. Access control system
Auch für AMSEC ESLAudit: Kurzreferenz (4 seiten)

Seite drucken

To move a copy of a system configuration from ESLConfig to a controller, select File at the top

left-hand corner of the window, choose Output to Flash Drive, and then choose All. This will

save the configuration file with the name ESLAUDIT.EAS. To load the configuration file into the

controller, see page 6.

Settings are modified on the screens that are shown below:

System & Lock Setup

Daylight Savings

Auto Daylight Savings Enable will cause the system clock to change appropriately on the

Sunday morning of the indicated week.

Duress

Duress Alarm Enable will activate duress codes. Duress codes are both one number

higher and one number lower than any PIN value. For example, if your PIN is 515151, if

you log into the system with either PIN 515152 or 515150, a duress signal will be sent to

the monitoring station through the store's alarm system. For this feature to function,

the optional AC expansion module must be installed and connected to the store's alarm

system.

Aux Input

Aux Input is a feature that allows an optional switch to be installed into the optional AC

expansion module. If this feature is installed and enabled and Time Lock is enabled,