AMSEC ESLAudit Інструкція з експлуатації Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Замки. AMSEC ESLAudit. AMSEC ESLAudit 15 сторінок. Access control system
Також для AMSEC ESLAudit: Короткий довідник (4 сторінок)
Друкувати сторінку
To move a copy of a system configuration from ESLConfig to a controller, select File at the top
left-hand corner of the window, choose Output to Flash Drive, and then choose All. This will
save the configuration file with the name ESLAUDIT.EAS. To load the configuration file into the
controller, see page 6.
Settings are modified on the screens that are shown below:
System & Lock Setup
Daylight Savings
Auto Daylight Savings Enable will cause the system clock to change appropriately on the
Sunday morning of the indicated week.
Duress
Duress Alarm Enable will activate duress codes. Duress codes are both one number
higher and one number lower than any PIN value. For example, if your PIN is 515151, if
you log into the system with either PIN 515152 or 515150, a duress signal will be sent to
the monitoring station through the store's alarm system. For this feature to function,
the optional AC expansion module must be installed and connected to the store's alarm
system.
Aux Input
Aux Input is a feature that allows an optional switch to be installed into the optional AC
expansion module. If this feature is installed and enabled and Time Lock is enabled,
11