AMSEC ESLAudit Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Schlösser AMSEC ESLAudit herunter. AMSEC ESLAudit 15 Seiten. Access control system
Auch für AMSEC ESLAudit: Kurzreferenz (4 seiten)

Seite drucken

1. Enter PIN.

2. Press ENTER/SAVE key.

1. Present key.

Open Lock

Without Time Delay

1. Login

2. Press the softkey located below the display on the left. Open1 for Door #1 or Open2

for Door #2.

3. After you hear a click, open door within 4 seconds.

With Time Delay

1. Login

2. Press the softkey located below the display on the left Open1 or Open2.

3. Wait for the Time Delay counter to reach the preset Time Delay.

4. Login again.

5. After you hear a click, open door within 4 seconds.

Batteries

Changing the Batteries

The battery compartment is locked on the bottom of the controller and holds two 9-volt

batteries. Pinch the release catches toward the center on either side to release the tray.

Battery Life

The percentage of remaining battery life is displayed on the LOCKED screen. To reach

the LOCKED screen, press any key when the lock is sleeping. If the controller is awake,

press QUIT until the LOCKED screen appears.

Adjusting Display Brightness

The Display Brightness screen is accessed from the LOCKED screen.

1. Press the Menu key twice.

2. Press the More softkey 3 times.

3. Use the and ¯ softkeys until the backlight bar graph is blinking.

4. Use

and

5. Press the "OK" key.

softkeys to adjust brightness.