Draper PT140K Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Elektrowerkzeug Draper PT140K herunter. Draper PT140K 12 Seiten. Multi-tool kit
Auch für Draper PT140K: Anleitung Handbuch (12 seiten)

Seite drucken
Draper PT140K Anleitung Handbuch
- FITTING A CUTTING/SANDING DISC (FIG.5):
With the disc holder (E) in the chuck, remove the screw
using the plain slot screwdriver (incorporated in the
spanner handle tip). Remove one of the spacing
washers from the end. Insert the screw through the
cutting disc, the washer and secure into the holder (Do
not over tighten).
- FITTING THE SANDING DRUMS (FIG.6):
To fit a drum (F), firstly loosen the small screw in the
top of the holder (G). This will allow the rubber to relax.
Slide the sanding drum onto the holder. To secure simply
tighten the screw and the rubber drum will swell,
gripping the drum. (Do not over tighten).

OPERATION AND USE

FIG.5
FIG.6
- 8 -
(E)
(G)
(F)