Draper PT140K Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Draper PT140K. Draper PT140K 12. Multi-tool kit
Anche per Draper PT140K: Manuale di istruzioni (12 pagine)

Stampa la pagina
Draper PT140K Manuale di istruzioni
- FITTING A CUTTING/SANDING DISC (FIG.5):
With the disc holder (E) in the chuck, remove the screw
using the plain slot screwdriver (incorporated in the
spanner handle tip). Remove one of the spacing
washers from the end. Insert the screw through the
cutting disc, the washer and secure into the holder (Do
not over tighten).
- FITTING THE SANDING DRUMS (FIG.6):
To fit a drum (F), firstly loosen the small screw in the
top of the holder (G). This will allow the rubber to relax.
Slide the sanding drum onto the holder. To secure simply
tighten the screw and the rubber drum will swell,
gripping the drum. (Do not over tighten).

OPERATION AND USE

FIG.5
FIG.6
- 8 -
(E)
(G)
(F)