Draper PT140K Talimatlar Kılavuzu - Sayfa 9

Elektrikli Alet Draper PT140K için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper PT140K 12 sayfaları. Multi-tool kit
Ayrıca Draper PT140K için: Talimatlar Kılavuzu (12 sayfalar)

Sayfayı Yazdır
Draper PT140K Talimatlar Kılavuzu
- FITTING A CUTTING/SANDING DISC (FIG.5):
With the disc holder (E) in the chuck, remove the screw
using the plain slot screwdriver (incorporated in the
spanner handle tip). Remove one of the spacing
washers from the end. Insert the screw through the
cutting disc, the washer and secure into the holder (Do
not over tighten).
- FITTING THE SANDING DRUMS (FIG.6):
To fit a drum (F), firstly loosen the small screw in the
top of the holder (G). This will allow the rubber to relax.
Slide the sanding drum onto the holder. To secure simply
tighten the screw and the rubber drum will swell,
gripping the drum. (Do not over tighten).

OPERATION AND USE

FIG.5
FIG.6
- 8 -
(E)
(G)
(F)