Draytek VigorSwitch G1282 Schnellstart-Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter Draytek VigorSwitch G1282 herunter. Draytek VigorSwitch G1282 14 Seiten. Web smart gigabit switch
Auch für Draytek VigorSwitch G1282: Schnellstart-Handbuch (10 seiten)
Seite drucken
software configuration
In this section, we take VigorSwitch P1282 as an example:
Before using the switch, perform the following steps:
1. Set up a physical path between the configured switch and a PC using
qualified Cat UTP. 5e cable with RJ-45 connector.
If a PC connects directly to the switch, you must set the same subnet mask for the PC and the
switch. The managed switch defaults are listed below:
IP adress
Subnet mask
DHCP client
Username
Password
2. After setting the correct IP address on your PC, open your web browser and access
the IP address of the switch.
192.168.1.224
255.255.255.0
Enabled (activated)
administration
administration
6