Draytek VigorSwitch G1282 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Draytek VigorSwitch G1282에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draytek VigorSwitch G1282 14 페이지. Web smart gigabit switch
Draytek VigorSwitch G1282에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지)

페이지 인쇄

software configuration

In this section, we take VigorSwitch P1282 as an example:

Before using the switch, perform the following steps:

1. Set up a physical path between the configured switch and a PC using

qualified Cat UTP. 5e cable with RJ-45 connector.

If a PC connects directly to the switch, you must set the same subnet mask for the PC and the

switch. The managed switch defaults are listed below:

IP adress

Subnet mask

DHCP client

Username

Password

2. After setting the correct IP address on your PC, open your web browser and access

the IP address of the switch.

192.168.1.224

255.255.255.0

Enabled (activated)

administration