BDS EKF 545 Original Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Original Betriebsanleitung für Elektrowerkzeug BDS EKF 545 herunter. BDS EKF 545 20 Seiten. Ekf series 300; ekf series 500; ekf series 600

Seite drucken

Tool change

Turning the reversing plates

To turn the reversing plates (20, fig. 6),

proceed as follows:

Loosen the side clamping screw (3,

fig. 4).

Unscrew the housing from the motor.

Loosen the fixing screws (21, fig. 6)

with the tools supplied in the scope

of supply, turn the reversing plate an

screw tightly.

Repeat the procedure for all reversing

plates of the miller.

Screw on the housing again.

Tight the clamping screw.

Replacing the reversing plate

When the reversing plate (20, fig. 6) is

completely worn, it must be replaced by a

new one:

Unscrew the Sie fixing screw (21,

fig. 6) with the screwdriver (Torx) and

remove the reversing plate.

Insert the reversing plate and tighten

the fastening screws again.

EKF Series 300/500/600