BDS EKF 545 원본 사용 설명서 - 페이지 14

{카테고리_이름} BDS EKF 545에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BDS EKF 545 20 페이지. Ekf series 300; ekf series 500; ekf series 600

Tool change

Turning the reversing plates

To turn the reversing plates (20, fig. 6),

proceed as follows:

Loosen the side clamping screw (3,

fig. 4).

Unscrew the housing from the motor.

Loosen the fixing screws (21, fig. 6)

with the tools supplied in the scope

of supply, turn the reversing plate an

screw tightly.

Repeat the procedure for all reversing

plates of the miller.

Screw on the housing again.

Tight the clamping screw.

Replacing the reversing plate

When the reversing plate (20, fig. 6) is

completely worn, it must be replaced by a

new one:

Unscrew the Sie fixing screw (21,

fig. 6) with the screwdriver (Torx) and

remove the reversing plate.

Insert the reversing plate and tighten

the fastening screws again.

EKF Series 300/500/600