ATIGO A1701 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System ATIGO A1701 herunter. ATIGO A1701 10 Seiten.

Seite drucken
Setting the monitor code
Each Master monitor on the system must have a unique identification code and this is set using DIP
switches on the back of the monitors.
•
Bit-1 to Bit-5 are used to set the unique master monitor code with the value between 1 and 32
•
To set slave monitors in an apartment or house, use the same code as the master monitor
•
Bit-6 is the BUS line terminal switch and has to be set to ON if the monitor is last on the BUS line,
otherwise it must be set to OFF.