ATIGO A1701 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System interkomu ATIGO A1701. ATIGO A1701 10 stron.

Drukuj stronę
Setting the monitor code
Each Master monitor on the system must have a unique identification code and this is set using DIP
switches on the back of the monitors.
•
Bit-1 to Bit-5 are used to set the unique master monitor code with the value between 1 and 32
•
To set slave monitors in an apartment or house, use the same code as the master monitor
•
Bit-6 is the BUS line terminal switch and has to be set to ON if the monitor is last on the BUS line,
otherwise it must be set to OFF.