ATIGO A1701 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Домофонна система ATIGO A1701. ATIGO A1701 10 сторінок.

Setting the monitor code

Each Master monitor on the system must have a unique identification code and this is set using DIP

switches on the back of the monitors.

•

Bit-1 to Bit-5 are used to set the unique master monitor code with the value between 1 and 32

•

To set slave monitors in an apartment or house, use the same code as the master monitor

•

Bit-6 is the BUS line terminal switch and has to be set to ON if the monitor is last on the BUS line,

otherwise it must be set to OFF.