Atlante Informatica Nano Cluster APU2 Erste Konfiguration - Seite 2

Blättern Sie online oder laden Sie pdf Erste Konfiguration für Firewall Atlante Informatica Nano Cluster APU2 herunter. Atlante Informatica Nano Cluster APU2 2 Seiten.
Auch für Atlante Informatica Nano Cluster APU2: Erste Konfiguration (2 seiten)

Seite drucken

FIRST FIREWALL CONFIGURATION

Set the IP address 192.168.1.2/24 on the PC or use a DHCP configuration.

Connect the LAN cable in the first right NIC indicated in the below box with an arrow.

Switch on the device by connecting it to the power supply.

You can have access to it at the web management wizard using the below URL:

http://192.168.1.1/wizard.php?xml=setup_wizard.xml

or without wizard:

Default access data:

Username:

Password:

Serial Access:

To verify the device operations, reset it or config problems, before asking to technical department, keep a

null modem cable and connect the item to the PC by serial, using "Putty" as software.

Parameters:

Baud rate: 115200

Settings: 8 bit/none/1/none.

Here you can find the instructions:

http://pfsense.firewallhardware.it/en/how_to_connect_via_serial_to_the_entry_level_model_pfsense.ht

http://192.168.1.1/

root

opnsense

www.firewallhardware.it |FIRST FIREWALL CONFIGURATION [ ITA|ENG ]

2/2