Atlante Informatica Nano Cluster APU2 Konfigurasi Pertama - Halaman 2

Jelajahi secara online atau unduh pdf Konfigurasi Pertama untuk Firewall Atlante Informatica Nano Cluster APU2. Atlante Informatica Nano Cluster APU2 2 halaman.
Juga untuk Atlante Informatica Nano Cluster APU2: Konfigurasi Pertama (2 halaman)

Halaman Cetak

FIRST FIREWALL CONFIGURATION

Set the IP address 192.168.1.2/24 on the PC or use a DHCP configuration.

Connect the LAN cable in the first right NIC indicated in the below box with an arrow.

Switch on the device by connecting it to the power supply.

You can have access to it at the web management wizard using the below URL:

http://192.168.1.1/wizard.php?xml=setup_wizard.xml

or without wizard:

Default access data:

Username:

Password:

Serial Access:

To verify the device operations, reset it or config problems, before asking to technical department, keep a

null modem cable and connect the item to the PC by serial, using "Putty" as software.

Parameters:

Baud rate: 115200

Settings: 8 bit/none/1/none.

Here you can find the instructions:

http://pfsense.firewallhardware.it/en/how_to_connect_via_serial_to_the_entry_level_model_pfsense.ht

http://192.168.1.1/

root

opnsense

www.firewallhardware.it |FIRST FIREWALL CONFIGURATION [ ITA|ENG ]

2/2