Atlante Informatica Nano Cluster APU2 첫 번째 구성 - 페이지 2

{카테고리_이름} Atlante Informatica Nano Cluster APU2에 대한 첫 번째 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlante Informatica Nano Cluster APU2 2 페이지.
Atlante Informatica Nano Cluster APU2에 대해서도 마찬가지입니다: 첫 번째 구성 (2 페이지)

페이지 인쇄

FIRST FIREWALL CONFIGURATION

Set the IP address 192.168.1.2/24 on the PC or use a DHCP configuration.

Connect the LAN cable in the first right NIC indicated in the below box with an arrow.

Switch on the device by connecting it to the power supply.

You can have access to it at the web management wizard using the below URL:

http://192.168.1.1/wizard.php?xml=setup_wizard.xml

or without wizard:

Default access data:

Username:

Password:

Serial Access:

To verify the device operations, reset it or config problems, before asking to technical department, keep a

null modem cable and connect the item to the PC by serial, using "Putty" as software.

Parameters:

Baud rate: 115200

Settings: 8 bit/none/1/none.

Here you can find the instructions:

http://pfsense.firewallhardware.it/en/how_to_connect_via_serial_to_the_entry_level_model_pfsense.ht

http://192.168.1.1/

root

opnsense

www.firewallhardware.it |FIRST FIREWALL CONFIGURATION [ ITA|ENG ]

2/2