Electrolux Beam Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Staubsauger Electrolux Beam herunter. Electrolux Beam 16 Seiten. Central

Beam Central Vacuum System

Before starting to design the Beam Central Vacuum system into your home, it is

important that you understand all the implications on HOW it can be installed.

Refreshingly, it is fairly simple to install.

Choose the location of the Beam Central Vacuum Appliance

The most popular locations for the appliance to be mounted are on a wall in a:

garage

utility room

under the stairs

loft

basement

plant room

cupboard (the smallest being a 500mm kitchen unit).

A bucket model, (dirt collects at the bottom of the appliance) should be fixed at

elbow height so that you can empty it easily with the top of the appliance no less than

30cm from the ceiling. If it is a bag model, it should be no less than 30cm from the

floor and there will need to be enough space above the appliance to remove the bag

along the entirety of its length (about 75cm).

Because the filters within the appliance are to a high standard, (98.3% filtration at 0.3

microns) the exhaust doesn't always need to be vented to the outside, especially if it

is located in a garage, plant room or basement. However, if the appliance is in a

popular area of the property and it is convenient to do so, venting to an internal void

(eg under the floor) or externally, is quite useful in reducing exhaust noise as well.

LONGER THAN

OUTSIDE

MUFFLER

How to design a

F YOU PLAN TO VENT THE EXHAUST

M AWAY

TO STOP WATER AND VERMIN FROM GETTING INTO THE EXHAUST

. (S

EE OUR PRICE LIST

THE LENGTH OF PIPE SHOULD BE NO

WITH AN EXHAUST VENT

1 Ductwork

2 Wall Inlet

3 Appliance utility inlet

4 Kitchen VacPan Inlet

5 Hose, wand and vacuum attachment

6 Appliance exhausted to outside

FLAP FITTED TO THE