Bose 131 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Bose 131 herunter. Bose 131 37 Seiten. Marine loudspeaker system
Auch für Bose 131: Benutzerhandbuch (18 seiten), Benutzerhandbuch (23 seiten), Service-Handbuch (7 seiten), Service-Handbuch (7 seiten), Handbuch (7 seiten)

Seite drucken

Installing Your Speakers From The Front Of The Bulkhead

B 15

Remove the perforated speaker cone shields from

the enclosure cartons. Insert the tabs of the shields

into the speaker ports. This helps protect the

speaker cone from potential damage during the

installation process.

Install six screws, if possible. You need at least three

B 16

screws installed and equally spaced.

Note: If you plan to use a screw gun to install the

screws, you should first set the gun to its lowest

torque setting (do not exceed 12 inch-pounds or

135.84 N-cm of torque). If the screw does not seat

properly, finish installing the screw at the next highest

torque setting, or by hand.

B 17

Remove the speaker cone shield from the enclosure.

Finally, snap on the grille to the mounting flange. No

B 18

hardware is needed to secure this part. You are now

finished with the assembly. Enjoy your music

system!