Bose 131 Manual do Proprietário - Página 16

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Bose 131. Bose 131 37 páginas. Marine loudspeaker system
Também para Bose 131: Manual do Proprietário (18 páginas), Manual do Proprietário (23 páginas), Manual de serviço (7 páginas), Manual de serviço (7 páginas), Manual (7 páginas)

Installing Your Speakers From The Front Of The Bulkhead

B 15

Remove the perforated speaker cone shields from

the enclosure cartons. Insert the tabs of the shields

into the speaker ports. This helps protect the

speaker cone from potential damage during the

installation process.

Install six screws, if possible. You need at least three

B 16

screws installed and equally spaced.

Note: If you plan to use a screw gun to install the

screws, you should first set the gun to its lowest

torque setting (do not exceed 12 inch-pounds or

135.84 N-cm of torque). If the screw does not seat

properly, finish installing the screw at the next highest

torque setting, or by hand.

B 17

Remove the speaker cone shield from the enclosure.

Finally, snap on the grille to the mounting flange. No

B 18

hardware is needed to secure this part. You are now

finished with the assembly. Enjoy your music

system!