Bose 131 소유자 매뉴얼 - 페이지 16

{카테고리_이름} Bose 131에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 131 37 페이지. Marine loudspeaker system
Bose 131에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 소유자 매뉴얼 (23 페이지), 서비스 매뉴얼 (7 페이지), 서비스 매뉴얼 (7 페이지), 매뉴얼 (7 페이지)

페이지 인쇄

Installing Your Speakers From The Front Of The Bulkhead

B 15

Remove the perforated speaker cone shields from

the enclosure cartons. Insert the tabs of the shields

into the speaker ports. This helps protect the

speaker cone from potential damage during the

installation process.

Install six screws, if possible. You need at least three

B 16

screws installed and equally spaced.

Note: If you plan to use a screw gun to install the

screws, you should first set the gun to its lowest

torque setting (do not exceed 12 inch-pounds or

135.84 N-cm of torque). If the screw does not seat

properly, finish installing the screw at the next highest

torque setting, or by hand.

B 17

Remove the speaker cone shield from the enclosure.

Finally, snap on the grille to the mounting flange. No

B 18

hardware is needed to secure this part. You are now

finished with the assembly. Enjoy your music

system!