AnkerMake M5 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für 3D-Drucker AnkerMake M5 herunter. AnkerMake M5 18 Seiten.

Take out the gantry frame with its packaging foam (C) and place it on the foam (B).
Route the USB-C cables through the holes, then insert the two supports of the gantry
frame into the base holes.
Move the gantry frame as shown below.
Fasten 8 screws into the platform to firmly fix the gantry frame.
Detach the bottom cover from the platform.
M5×8
05
06