AnkerMake M5 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Impressoras 3D AnkerMake M5. AnkerMake M5 18 páginas.

Take out the gantry frame with its packaging foam (C) and place it on the foam (B).

Route the USB-C cables through the holes, then insert the two supports of the gantry

frame into the base holes.

Move the gantry frame as shown below.

Fasten 8 screws into the platform to firmly fix the gantry frame.

Detach the bottom cover from the platform.

M5×8