AnkerMake M5 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer 3D AnkerMake M5. AnkerMake M5 18 halaman.

Take out the gantry frame with its packaging foam (C) and place it on the foam (B).

Route the USB-C cables through the holes, then insert the two supports of the gantry

frame into the base holes.

Move the gantry frame as shown below.

Fasten 8 screws into the platform to firmly fix the gantry frame.

Detach the bottom cover from the platform.

M5×8