anko HEG66 Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fan anko HEG66 herunter. anko HEG66 16 Seiten. Patio fan.
Align the head assembly motor mount over the top of the chrome tube in the stand
•
and then lower down.
Tighten the locking thumb screw on the back of the motor mount until secure
•
3.3 Safety Grille and Fan Blade
To assemble the safety grille and blade assembly, first remove the 4 screws and
•
washers as identified. Important: Do Not Remove any other screws.
Ensuring the small hole located in the edge of the grille is at the bottom, fit the rear
•
safety grille into position onto the front of the motor housing and refit the 4 screws
and washers and tighten. Note: Only use a hand screw driver to tighten the screws.
Small Hole at the bottom
Page 10 of 16