anko HEG66 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Вентилятор anko HEG66. anko HEG66 16 страниц. Patio fan.

Align the head assembly motor mount over the top of the chrome tube in the stand

•

and then lower down.

Tighten the locking thumb screw on the back of the motor mount until secure

•

3.3 Safety Grille and Fan Blade

To assemble the safety grille and blade assembly, first remove the 4 screws and

•

washers as identified. Important: Do Not Remove any other screws.

Ensuring the small hole located in the edge of the grille is at the bottom, fit the rear

•

safety grille into position onto the front of the motor housing and refit the 4 screws

and washers and tighten. Note: Only use a hand screw driver to tighten the screws.

Small Hole at the bottom

Page 10 of 16