anko HEG66 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko HEG66. anko HEG66 16 pages. Patio fan.

Align the head assembly motor mount over the top of the chrome tube in the stand

•

and then lower down.

Tighten the locking thumb screw on the back of the motor mount until secure

•

3.3 Safety Grille and Fan Blade

To assemble the safety grille and blade assembly, first remove the 4 screws and

•

washers as identified. Important: Do Not Remove any other screws.

Ensuring the small hole located in the edge of the grille is at the bottom, fit the rear

•

safety grille into position onto the front of the motor housing and refit the 4 screws

and washers and tighten. Note: Only use a hand screw driver to tighten the screws.

Small Hole at the bottom

Page 10 of 16