Druck UNIK5700 Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Druck UNIK5700 herunter. Druck UNIK5700 8 Seiten. Marine approved
Seite drucken
3.3 Re-assembly
1.
Exchange O-ring and put it into the seal groove. Make sure the O-ring is fully seated in the
groove. Please always replace with a new O-ring when reassembling the backend. The part
number of the O-ring is 163M2956-1.
2.
Reconnect the connector, ensuring correct alignment. Please pull back slightly to make sure
it is not pulled out and fully fixed.
3.
Assemble the screws and spring washers. Ensure screws and washers are undamaged
before installing.
Copyright 2022 Baker Hughes Company.
2 | UNIK5600/5700 Demountable Backend Exchange Manual–English