Druck UNIK5700 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Аксесуари Druck UNIK5700. Druck UNIK5700 8 сторінок. Marine approved
Друкувати сторінку
3.3 Re-assembly
1.
Exchange O-ring and put it into the seal groove. Make sure the O-ring is fully seated in the
groove. Please always replace with a new O-ring when reassembling the backend. The part
number of the O-ring is 163M2956-1.
2.
Reconnect the connector, ensuring correct alignment. Please pull back slightly to make sure
it is not pulled out and fully fixed.
3.
Assemble the screws and spring washers. Ensure screws and washers are undamaged
before installing.
Copyright 2022 Baker Hughes Company.
2 | UNIK5600/5700 Demountable Backend Exchange Manual–English