Druck UNIK5700 매뉴얼 - 페이지 4
{카테고리_이름} Druck UNIK5700에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Druck UNIK5700 8 페이지. Marine approved
페이지 인쇄
3.3 Re-assembly
1.
Exchange O-ring and put it into the seal groove. Make sure the O-ring is fully seated in the
groove. Please always replace with a new O-ring when reassembling the backend. The part
number of the O-ring is 163M2956-1.
2.
Reconnect the connector, ensuring correct alignment. Please pull back slightly to make sure
it is not pulled out and fully fixed.
3.
Assemble the screws and spring washers. Ensure screws and washers are undamaged
before installing.
Copyright 2022 Baker Hughes Company.
2 | UNIK5600/5700 Demountable Backend Exchange Manual–English