DT SWISS RATCHET EXP Technisches Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Schalter DT SWISS RATCHET EXP herunter. DT SWISS RATCHET EXP 20 Seiten.
Auch für DT SWISS RATCHET EXP: Wartungshandbuch (13 seiten)
Seite drucken
2.7 DISMOUNTING THE BEARING FROM THE THREADED RATCHET
1. Put the threaded ratchet with the bearing
into the mounting / dismounting tool.
→ The toothing of the threaded ratchet
must face upwards.
→ Put the ratchet on the side of the tool
with the fitting diameter. The ratchet
may only move minimally in the tool.
2. Slide the axle with its short end through the
bearing.
3. Push the disassembly tool onto the axle and
tap the bearing out of the ratchet with slight
hammer strokes using a nylon hammer.
4. Remove the ratchet and the bearing from
the tool.
HXTXXX00N6106S
Ratchet EXP - Technical Manual
11