DT SWISS RATCHET EXP 기술 매뉴얼 - 페이지 11

{카테고리_이름} DT SWISS RATCHET EXP에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT SWISS RATCHET EXP 20 페이지.
DT SWISS RATCHET EXP에 대해서도 마찬가지입니다: 유지 관리 매뉴얼 (13 페이지)

페이지 인쇄
DT SWISS RATCHET EXP 기술 매뉴얼

2.7 DISMOUNTING THE BEARING FROM THE THREADED RATCHET

1. Put the threaded ratchet with the bearing
into the mounting / dismounting tool.
→ The toothing of the threaded ratchet
must face upwards.
→ Put the ratchet on the side of the tool
with the fitting diameter. The ratchet
may only move minimally in the tool.
2. Slide the axle with its short end through the
bearing.
3. Push the disassembly tool onto the axle and
tap the bearing out of the ratchet with slight
hammer strokes using a nylon hammer.
4. Remove the ratchet and the bearing from
the tool.
HXTXXX00N6106S
Ratchet EXP - Technical Manual
11