DT SWISS RATCHET EXP Panduan Teknis - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Beralih DT SWISS RATCHET EXP. DT SWISS RATCHET EXP 20 halaman.
Juga untuk DT SWISS RATCHET EXP: Panduan Pemeliharaan (13 halaman)

Halaman Cetak
DT SWISS RATCHET EXP Panduan Teknis

2.7 DISMOUNTING THE BEARING FROM THE THREADED RATCHET

1. Put the threaded ratchet with the bearing
into the mounting / dismounting tool.
→ The toothing of the threaded ratchet
must face upwards.
→ Put the ratchet on the side of the tool
with the fitting diameter. The ratchet
may only move minimally in the tool.
2. Slide the axle with its short end through the
bearing.
3. Push the disassembly tool onto the axle and
tap the bearing out of the ratchet with slight
hammer strokes using a nylon hammer.
4. Remove the ratchet and the bearing from
the tool.
HXTXXX00N6106S
Ratchet EXP - Technical Manual
11