AOMWAY Commander V1S Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für 3D Glasses AOMWAY Commander V1S herunter. AOMWAY Commander V1S 16 Seiten. Fpv goggles

AOMWAY 14

1. Make sure power supply to the goggles is normal;

2. Verify if the goggles' channel frequency is the same as

transmitter side;

3. See if transmitter side is working as normal;

4. Check if display mode on goggles has been selected

correctly.

 Head tracker is not working:

1. See if pan/tilt servo cable are plugged into the right port

on R/C receiver;

2. Check if the data cable between the goggles and radio

controller is properly connected;

3. Verify the trainer function of radio controller is switched

on and the channels are selected right;

4. Make sure all cable connectors are firmly plugged into

ports.

 The wireless video signal received by the goggles is poor

or the transmitting range is too close:

1. Check if there is any other device nearby is transmitting at

the same frequency;

2. User should avoid using the goggles under high magnetic

field environments like parking lot, train station, airport,

military base, radar station and power plant, etc.;

3. Verify if the SMA connectors on goggles are in good

condition, and the antenna should be mounted on properly

and kept in good form;

4. Ensure transmitter and receiver are set on the same

WWW.AOMWAY.COM

VISION SYSTEMS