AOMWAY Commander V1S 사용자 설명서 - 페이지 14
{카테고리_이름} AOMWAY Commander V1S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AOMWAY Commander V1S 16 페이지. Fpv goggles
페이지 인쇄
AOMWAY 14
1. Make sure power supply to the goggles is normal;
2. Verify if the goggles' channel frequency is the same as
transmitter side;
3. See if transmitter side is working as normal;
4. Check if display mode on goggles has been selected
correctly.
Head tracker is not working:
1. See if pan/tilt servo cable are plugged into the right port
on R/C receiver;
2. Check if the data cable between the goggles and radio
controller is properly connected;
3. Verify the trainer function of radio controller is switched
on and the channels are selected right;
4. Make sure all cable connectors are firmly plugged into
ports.
The wireless video signal received by the goggles is poor
or the transmitting range is too close:
1. Check if there is any other device nearby is transmitting at
the same frequency;
2. User should avoid using the goggles under high magnetic
field environments like parking lot, train station, airport,
military base, radar station and power plant, etc.;
3. Verify if the SMA connectors on goggles are in good
condition, and the antenna should be mounted on properly
and kept in good form;
4. Ensure transmitter and receiver are set on the same
WWW.AOMWAY.COM
VISION SYSTEMS