AOMWAY Commander V1S Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Occhiali 3D AOMWAY Commander V1S. AOMWAY Commander V1S 16. Fpv goggles

AOMWAY 14

1. Make sure power supply to the goggles is normal;

2. Verify if the goggles' channel frequency is the same as

transmitter side;

3. See if transmitter side is working as normal;

4. Check if display mode on goggles has been selected

correctly.

 Head tracker is not working:

1. See if pan/tilt servo cable are plugged into the right port

on R/C receiver;

2. Check if the data cable between the goggles and radio

controller is properly connected;

3. Verify the trainer function of radio controller is switched

on and the channels are selected right;

4. Make sure all cable connectors are firmly plugged into

ports.

 The wireless video signal received by the goggles is poor

or the transmitting range is too close:

1. Check if there is any other device nearby is transmitting at

the same frequency;

2. User should avoid using the goggles under high magnetic

field environments like parking lot, train station, airport,

military base, radar station and power plant, etc.;

3. Verify if the SMA connectors on goggles are in good

condition, and the antenna should be mounted on properly

and kept in good form;

4. Ensure transmitter and receiver are set on the same

WWW.AOMWAY.COM

VISION SYSTEMS